Replacing The Lock On A Front Door

If ever you are moving into a new home, it is quite often a good idea to replace the lock on your house main door. There is a feeling of much security since you yourself knows that the previous owner or tenants living there don’t have access on your new home.. Aside from this another reason for replacing the old lock is that parts or mechanism that is ineffective.

Purchasing a new lock

To replace the lock, you will need only a new door lock set and a screwdriver or drill. It is an easy task that should take no longer than a few minutes. Just be sure to purchase the same brand of lock as the existing one, so that it will fit into the same holes without need for alterations to the door. The brand can usually be found on the latch. You might want to take the old lock with you to the hardware store to ensure that you buy the right brand and style of lock.

If you need to purchase new locks here is an article that might help you click here to learn more.

Your new lock set should contain four basic pieces: two door knobs and a latch piece which will be fixed onto the door, and the strike plate that attaches to the door frame. The set should also contain two long nails and four short nails.

Removing the old lock

First remove the old door lock by unscrewing the door knob on the inside of the door. The screws may be obscured by the door handle so you may need to turn the handle to reach the screws. Both door knobs should come loose from the door when you remove the screws. Next, remove the latch at the side edge of the door by using your screwdriver to remove the nails and pull out the latch.

Installing the new lock

Now take your new latch piece and insert it into the hole in the side edge of the door. The latch should be attached in the right direction, with the tapered side facing the outside of the door. Adjust the latch in place such that the part that will attach to the door knobs is in the center of the hole on either side of the door. Fit the new door knobs on the door, placing the door knob with the screw holes on the inside of the door. Use the long nails to attach the door knobs to the door and two short nails to secure the latch piece onto the door. Tighten the screws such that all parts are flush against the door.

It is very important to always have your front door lock in top condition since this is the very first layer of security inside your house. If you’re have a hard time with have your locks replaced then call immediately a professional to handle the task for you.

 

Taking Care of Your Steam Heating System

It somehow pays to have a professional that will look upon, a licensed heating contractor to check your steam system if it is working fine every year. But actually, you can perform three important maintenance tasks on your steam heating system by yourself. Caring properly for your system will help you save money through the years with greater efficiency, but you’ll also have the needed peace of mind knowing that your system is operating safe and sound.

Here are the tasks you can perform:

Check the steam gauge regularly: Make sure that it’s within the normal range. If it isn’t, shut the system down immediately and call for service.

Check the safety valve every month: Located on the top of the boiler, this important valve vents excess pressure if the boiler goes crazy and exceeds safe levels. When the system is hot, push down on the handle to see if steam comes out. Stand away from the outlet — the steam is boiling hot. If no steam comes out, call a service person to replace the valve immediately.

Click here if you are having a hard time with your steam heating system.

Check the water level once a month: The water-level gauge has valves on each side. Open them both and make sure that the water level is in the middle, and then close the valves. If you didn’t see any water, shut off the boiler, let it cool down, and then add water.

Because steam systems occasionally need water added, it’s better and more convenient to have an automatic water valve added to the system. The valve monitors water levels and adds water ever so slowly to avoid damaging the boiler.

You also can do a few things to keep your radiators working well:

Make sure that every radiator slopes slightly toward the steam inlet pipe. If one doesn’t, slip a 1⁄4-inch-thick rectangle of wood under the feet at the vent end. Doing so prevents those irritating knocking and clunking noises.

Check the vents to make sure that they aren’t blocked. Corrosion and paint can keep the vent from venting and then air trapped in the radiator prevents steam from entering the radiator. If your vent is blocked, replace it. Your local hardware store probably carries them, and they simply screw off and on.

Check the position of the inlet valves. They should be either all the way closed or all the way open. A partially open or shut valve does nothing to regulate heat and causes knocking and clanging.

You can do these tasks by yourself if you know them too well but if not, better leave the task to a professional.

 

How to Install Childproof Locks

It is very important that when it comes to your child’s safety, child proof locks play a really huge role. When your child starts walking, they will also start exploring the cabinets and drawers in your house in Salisbury. So, it is very important that all the dangerous items be locked away to prevent little hands from reaching them. You should also lock away your valuables, as children may consider them as their toys. Before installing child proof locks, you must know about the different types of locks available and how they differ in their function. Installation of child proof lock is a task that anyone can do really.

Choosing the Right Lock

There are different types of child proof locks available in the market and different locks are installed differently. Slide locks have a u-shaped plastic ring on which the lock slides. They are great for cabinets to lock the handles together. Interior safety latches are those that can be placed inside the drawers and fridge locks are those that can be glued on to the fridge. If you want to know how slide locks are installed, then go to the next step. If you are looking for instructions on how to install an interior safety latch, see steps 5 and 6, and if it is fridge locks that you are interested in, go to step 7.

If you need a more comprehensive tip on how to install childproof locks click here now!

Open the Slide Lock

The locking mechanism of the slide lock is located on the u-shaped ring. It is rectangular in shape and you can see the opening buttons on either side of the lock. Press on both the buttons simultaneously and slide it on the plastic ring to open it.

Install the Slide Lock

You can insert the free end of the plastic ring into the hole on the lock and slide the lock so that it stays nice and tight. Always remember to keep it tight, as your kids can put their hands in the gap, if it is loose.

Installing Fridge Lock

Clean the surface, where you want to stick the lock. Then peel off the backing from both sides and stick the childproof lock on the fridge.